TDUK Timber statistics

TDUK timber imports show slight improvements in Q3

TDUK timber imports show slight improvements in Q3

New timber import figures from Timber Development UK (TDUK) covering Q3 2025 reveal an ongoing mixed picture for the sector, with year-to-date volumes still trailing 2024 but showing some signs of improvement as the year progressed.

The latest statistics confirm that total imports in the first nine months of 2025 reached 7.01 million m³ – some 2.1% below the 7.15 million m³ recorded in the same period of 2024. This gap has narrowed since the half-year point, however, when volumes were down by 2.9%.

This slight uplift has been driven by a need to replenish stocks after the flurry of construction activity we saw in Q2. This resulted in a more positive third quarter for imports, when we saw higher volumes than in Q3 2024 across the softwood, hardwood, plywood, OSB and engineered wood product sectors.

Slight decrease in overall imports

Overall imports for the quarter were only 0.2% lower than Q3 2024, with a marked drop in MDF imports preventing combined volumes from moving into year-on-year growth.

For the year-to-date, solid wood imports from January to September were 2.5% lower than in the same time period in 2024, with panel products down by 1.3%.

Weaker demand for softwood and a significant 25% fall in imported MDF remain the main factors holding back overall growth. By contrast, hardwood, particleboard and OSB imports have all edged ahead of 2024 levels, with hardwood plywood, softwood plywood and engineered wood products also delivering consistent gains throughout 2025.

Softwood imports shifts – but hardwood unchanged

The supply balance within softwood imports has also shifted. Despite a stronger September from Sweden, reduced volumes from the country accounted for more than the entire year-to-date deficit of 118,000m³. Germany and the Republic of Ireland also recorded declines of 9% and 14% respectively, lowering their shares of supply. These reductions were partly offset by increased volumes from Latvia and Finland, which rose by more than 60,000m³ and 30,000m³ respectively.

Softwood import values rose sharply in the nine months to September, increasing by 9% compared with 2024. Planed softwood values climbed 8%, and sawn goods rose 11%. These increases were driven by a 12% rise in the average price of all softwood imports, despite overall softwood volumes falling by almost 3%. Pricing data indicates that softwood prices have risen over the past 12 months, diverging from the downward trends seen in sawn hardwood and plywood. Recent months, however, show signs of softwood prices beginning to soften again.

Hardwood imports remained largely unchanged year-on-year, growing by just 0.2% in total volume. The USA, Latvia and France all increased their supplies by 5%, 25% and 4% respectively, while Cameroon saw a 19% rise. Tropical hardwood volumes fell by 3%, despite significant increases from Cameroon and Malaysia, due to reductions from other key supplying countries. Temperate hardwood imports dropped by around 6%, with declines from Romania, the USA and Estonia offset only by France, which increased volumes by around 2,000m³.

Panel products ‘varied’

The Panel products sector showed a varied performance. Hardwood plywood imports rose by approximately 55,000m³, driven primarily by increased supply from China and Malaysia, which together provided 80% of the total. At present it is difficult to determine if this marked increase is due to increased consumption or Chinese hardwood plywood being diverted due to EU anti-dumping measures.

Particleboard volumes increased by just over 1%, though changes in supply patterns were notable, with losses from Portugal and Belgium balanced by gains from China and Luxembourg.

In engineered products, Finland continued to dominate the UK Laminated Veneer Lumber (LVL) market, supplying 83% of volume. Although this share is slightly lower than in 2024, Finnish volumes still grew by around 14%.

According to the latest NSD Softwood Import Forecast, import volumes will fall by around 3% in 2025 to around 5.62 million m3, before growing by 3.7% in 2026 to around 5.83 million m3. Demand remains weak, but this forecast growth would place import volumes slightly higher than seen in any of the last five years, suggesting the market may finally have turned a corner, although there is clearly a long way to go.

‘Market remains difficult’

Nick Boulton, TDUK Head of Technical and Trade, said: “The latest timber import figures for Q1-3 od 2025 do show a slight improvement, albeit from a very low base, with several product categories showing signs of uplift in the third quarter in particular. This is most likely restocking after the raised construction activity we saw at mid-year.

“That said, the market remains difficult and overall volumes remain behind last year’s levels. The slight improvement is welcome, but it underlines just how sensitive demand continues to be across the sector. We will need to see sustained stability in 2026 before confidence can fully return to the market.”

TDUK members can sign in and read the full report on the TDUK website.

More news

GK Joinery project

The GK Joinery Forest reaches over 400 trees planted

John Grant, Managing Director at GK Joinery, discusses the GK Joinery Forest, in which the company plants a tree for every order received, to give back to the environment. “We started the GK Joinery Forest to add to the environmental work we were already doing across the business. “We work with timber every day, so… Continue reading The GK Joinery Forest reaches over 400 trees planted
Forterro AI 2026

Forterro launches own AI platform

Software provider for sectors including fenestration, Forterro, has announced the launch of MyForterro.ai, its AI platform to help businesses that make, move and craft the products the world relies on apply artificial intelligence to everyday operational challenges. MyForterro.ai connects leading AI models with the trusted operational data held across Forterro’s secure software ecosystem. Customers can… Continue reading Forterro launches own AI platform
Makita tower light 2026

Makita says “let there be light” with ML014G Tower Light

The new portable ML014G Tower Light from Makita is said to provide bright task lighting on construction sites where there is no power source. Compatible with both 18V LXT and 40V XGT batteries, and providing a maximum luminous flux of 15,000 lumens, the Makita Tower Light is said to be easy to carry and set… Continue reading Makita says “let there be light” with ML014G Tower Light